|
|
| Line 1: |
Line 1: |
| | [[Image:TNG-3B.jpg |thumb|TNG-3B Serial A/D Computer Interface.]] | | [[Image:TNG-3B.jpg |thumb|TNG-3B Serial A/D Computer Interface.]] |
| − | TNG-3B is a data-acquisition device for general-purpose and human-computer interfacing. TNG is pronounced 'thing' in partial reference to The Cat in the Hat by Dr. Seuss, and stands for "totally neat gadget". It is manufactured and sold by [http://www.sensyr.com/ SenSyr LLC].
| + | NeatLab is a USB-based data-acquisition device for general-purpose and human-computer interfacing. NeatLab is under development by [http://www.sensyr.com/ SenSyr LLC]. |
| | | | |
| − | The visual programming environment [[NeatTools]] has built-in support for TNG-3B, though it can operate with other devices. TNG-3B can operate with software other than NeatTools. Any software package that can control a standard PC serial (COM:) port can communicate with TNG-3B. That software must be able to continuously assert DTR and RTS which are RS-232 handshake lines. However, since NeatTools and TNG-3B have been designed, from the outset, to work together, there are clear advantages in doing so.
| |
| | | | |
| | == Installation == | | == Installation == |
| | | | |
| − | TNG-3B is easy to install and to use. No card has to be installed on the inside of the computer. Sensors and other devices simply plug into TNG-3B. Multiple TNG-3Bs may be attached to a single computer and used simultaneously. With a single serial cable connecting a TNG to the host computer, cabling is often simplified over installed-board solutions. TNG-3B works with many USB to RS-232 adapters. A 6' 9-conductor M-F serial cable is included.
| |
| | | | |
| | ==Technical Specifications== | | ==Technical Specifications== |
| | | | |
| − | TNG-3B is an input-only device that streams analog (8 channels with 8-bit resolution) and digital data (8 lines) to a host computer connected by an RS-232 serial port at 19.2 kbps. Operating power is derived from otherwise unused RS-232 handshaking and data lines. Each input has its own connector jack: a 3.5 mm stereo phone jacks for analog inputs, and 2.5 mm mono phone jacks for digital inputs. TNG-3B is a 5 volt device.
| |
| | | | |
| | ==NeatTools Integration== | | ==NeatTools Integration== |
| | | | |
| | [[TNG-3B Module]] | | [[TNG-3B Module]] |
Revision as of 16:11, 11 April 2010
TNG-3B Serial A/D Computer Interface.
NeatLab is a USB-based data-acquisition device for general-purpose and human-computer interfacing. NeatLab is under development by SenSyr LLC.
Installation
Technical Specifications
NeatTools Integration
TNG-3B Module
