Difference between revisions of "NeatLab"
From NeatTools
| Line 7: | Line 7: | ||
==Technical Specifications== | ==Technical Specifications== | ||
| + | |||
| + | Please read the manual: [http://www.sensyr.com/NeatLab/NeatLab.pdf] | ||
| + | |||
| + | NeatLab has eight 10-bit analog-to-digital (4 on 3.5 mm stereo jacks; 4 on RJ-45 connector), eight digital I/O lines (4 on 3.5 mm jacks; 4 on RJ-45 connector), and two SPI ports (lower RJ-45 connectors). All digital I/O lines can be independently configured as either input or output. A second digital I/O port, Port D, is available on an unpopulated header. | ||
| + | |||
| + | NeatLab has two jumpers. | ||
Revision as of 18:00, 11 April 2010
NeatLab is a USB-based data-acquisition device for general-purpose and human-computer interfacing. NeatLab is under development by SenSyr LLC.
Installation
Technical Specifications
Please read the manual: [1]
NeatLab has eight 10-bit analog-to-digital (4 on 3.5 mm stereo jacks; 4 on RJ-45 connector), eight digital I/O lines (4 on 3.5 mm jacks; 4 on RJ-45 connector), and two SPI ports (lower RJ-45 connectors). All digital I/O lines can be independently configured as either input or output. A second digital I/O port, Port D, is available on an unpopulated header.
NeatLab has two jumpers.
