Difference between revisions of "TNG-4"

From NeatTools
(Replaced content with 'under construction thumb|TNG-3B Serial Computer Interface. == Installation == ==Technical Specifications== == FAQ == ==NeatTools Integration== […')
Line 1: Line 1:
 
under construction
 
under construction
 
[[Image:TNG-3B.jpg |thumb|TNG-3B Serial Computer Interface.]]
 
[[Image:TNG-3B.jpg |thumb|TNG-3B Serial Computer Interface.]]
TNG-3B is a data-acquisition device for general-purpose and human-computer interfacing. TNG is pronounced 'thing' in partial reference to The Cat in the Hat by Dr. Seuss, and stands for "totally neat gadget".  It is manufactured and sold by [http://www.sensyr.com/ SenSyr LLC].
 
 
The visual programming environment [[NeatTools]] has built-in support for TNG-3B, though it can operate with other devices. TNG-3B can operate with software other than NeatTools. Any software package that can control a standard PC serial (COM:) port can communicate with TNG-3B. That software must be able to continuously assert DTR and RTS which are RS-232 handshake lines. However, since NeatTools and TNG-3B have been designed, from the outset, to work together, there are clear advantages in doing so.
 
  
 
== Installation ==
 
== Installation ==
  
TNG-3B is easy to install and to use. No card has to be installed on the inside of the computer. Sensors and other devices simply plug into TNG-3B. Multiple TNG-3Bs may be attached to a single computer and used simultaneously. With a single serial cable connecting a TNG to the host computer, cabling is often simplified over installed-board solutions. TNG-3B works with many USB to RS-232 adapters. A 6', 9-conductor M-F serial cable is included.
 
  
 
==Technical Specifications==
 
==Technical Specifications==
  
TNG-3B is an input-only device that streams analog (8 channels with 8-bit resolution) and digital data (8 lines) to a host computer connected by an RS-232 serial port at 19.2 kbps. Operating power is derived from otherwise unused RS-232 handshaking and data lines. Each input has its own connector jack: a 3.5 mm stereo phone jacks for analog inputs, and 2.5 mm mono phone jacks for digital inputs. TNG-3B is a 5 volt device.
 
  
 
== FAQ ==
 
== FAQ ==
FAQ Document: [http://www.sensyr.com/manuals/TNG3B.FAQ.pdf]
+
 
  
 
==NeatTools Integration==
 
==NeatTools Integration==
  
[[TNG-3B Module]]
+
[[TNG-4 Module]]

Revision as of 17:13, 11 April 2010

under construction

TNG-3B Serial Computer Interface.

Installation

Technical Specifications

FAQ

NeatTools Integration

TNG-4 Module